Hi, We have the same problem with this modems... When they try to connect, they get an error in the middle of the handshake, and they disconnect. Others, they connect to 44.000 bps/48.000 bps, but they couldn't get traffic, they couldn't surf the webs. Well, I see the review of the TAOS 8.x, and Ascend (Lucent), say that firmware, have a "fix" or something for the Conexant HCF and PC-Tel HSP. May be you want read this at ftp://ftp.ascend.com Good luck (if you get some info, please tell me, Thanks.) Juan Pablo Catino Buenos Aires, Argentina ----- Original Message ----- From: "Troy Settle" <troy at psknet.com> To: <ascend-users at bungi.com> Sent: Tuesday, March 20, 2001 12:37 AM Subject: [Ascend] (ASCEND) Customer Rockwell/Conexiant Modems > > All, > > Is it just me, or are others having problems with HCF family of modems? > > Compaq's with HCF Micromodems can not connect to my TNT running 8.0.4 > PCTEL HSP can not connect to TNT running 8.0.4 or Max running 7.0.26 > > Handshake finishes out at speeds of anywhere from 34k to 54k, but stops cold > before windows even has a chance to initiate PPP. > > Disabling V90 (+MS=V34) will allow the modem to connect perfectly at 31.2 or > 33.6. I've tried all sorts of firmware updates, nothing seems to work. > > Same modems seem to connect just fine to Cisco, Livingston, and USR. I > spent nearly an hour on the phone tonight with one customer who's getting > 53.3K to a competitor with PM3, but could not establish a good connection > with us at all (max 7.0.26). > > > Thanks for any insight that might help me out here, > > -- > Troy Settle > Pulaski Networks > 540.994.4254 > > It's always a long day, 86400 doesn't fit into a short > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > To get FAQ'd: <http://www.nealis.net/ascend/faq> > _______________________________________________ > rte-ascend mailing list > rte-ascend at lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend