If you are using NAT then you have to setup a port forward as otherwise by default NAT doesn't allow any inbound connections to the WAN IP: Ethernet > NAT > NAT > Static Mappings > Static Map xx > Dst Port #=23 Protocol=TCP Loc Port #=23 Loc Adrs=192.168.121.254 <--- private LAN address of the router > From: John Farrell <isp2 at quik.com> > Date: Wed, 02 May 2001 09:49:20 -0400 > Subject: (ASCEND) remote telnet p75 > I recently used an Pipeline 75 for a ISDN setup at a new clients location > instead of Netopia 3100. I had been using the Netopia's exclusively for > ISDN some time and do not have much experience with the Pipeline > do have several Max6000. I am fairly comfortable with configuring the > Ascends. My question to any of you is why can't I not open a remote > telnet session to the Pipeline. During the set up I configured "remote > mgmt = yes" and set up a telnet password which does work on a > local telnet > session. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/