Steven Copeland wrote: > > Chris, the problem is that you went from PRI to channelized T-1. In PRI > world, the D channel does all of the signaling and call setup so it tells > the max whether or not the incoming call needs to be routed to the digital > control processor on the max for an ISDN call or to a modem for an analog > call. The default setting to allow this is slot=0. Now you have switched > to a Channelized T-1 and there is no D channel to tell the max how to handle > the call. Now you must tell your max what slot your modems are on so it can > hand of the call to an analog modem. To do this, you need to have all of > the channels on the max set to "ch 1 slot=3", "ch 2 slot=3" and so forth for > all 24 channels on the T-1. setting as below... Alright! With the help of both Steven and David I got the problem fixed... I set the Rob Ctl to Inc-Wink-200 and then assigned the modems to the T1. Thanks everyone! -- Chris o----< ccook at tcworks.net >------------------------------------o |Chris Cook - Admin |TCWORKS.NET - http://www.tcworks.net | |The Computer Works ISP |FreeBSD - http://www.freebsd.org | o-------------------------------------------------------------o ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/