I've had this before as well. In the end, the solution was to get rid of the cheap switch I had, and install a Cisco 2900, which works great for everything but my iMac. Some things to try include replacing the ethernet cable, try a different port on your switch, try a different switch. Also, have you tried the dongle that comes with the 6k? I've never needed it, but it may solve your problems. IIRC, the dongle reverses pins 3 & 6, so making a custom cable can yeild the same results. Good luck, -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com ** -----Original Message----- ** From: owner-ascend-users at max.bungi.com ** [mailto:owner-ascend-users at max.bungi.com]On Behalf Of C. Wiley ** Sent: Wednesday, November 14, 2001 9:22 PM ** To: ascend-users at max.bungi.com ** Subject: (ASCEND) Max loses ethernet ** ** ** Hi. ** ** I've got a strange problem that has cropped up over the last few weeks. ** Every once in a while I'll have a Max 6000 with software load 7.0.4 lose ** its ethernet connectivity. The PRI's are still functioning and ** the modems ** answer incoming calls. I at first thought I had a chasis going bad so I ** swapped it out, but now the replacemnet is doing the same thing. ** ** I'm at wits end and thought those on this list might have ideas and/or ** things I could look at to try and find the source of the problem. ** ** Thanks, ** ** Clint ** ** ++ Ascend Users Mailing List ++ ** To unsubscribe: send unsubscribe to ascend-users-request at bungi.com ** Archives: http://www.nexial.com/mailinglists/ ** ** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/