It's a Cisco 2924XL switch. It seems like the problem started when we upgraded to release 8.0.5. Regards, Jonas Back Cable & Wireless - Sweden http://www.cw.com/se > -----Original Message----- > From: Mick Dobra [mailto:mdobra at mtco.com] > Sent: den 16 november 2001 18:23 > To: Jonas Back > Cc: 'ascend' > Subject: Re: (ASCEND) DSLMAX20 and bad ethernet packet > > > On Thu, 15 Nov 2001, Jonas Back wrote: > > > Hi, > > > > I'm having problems with our DSLMAX20. It drops packets on > the Ethernet and > > the switch it's connected to shows alignment errors. We > also have Linux > > machine connected to the network on the ethernet side and > the Linux machine > > report CRC errors on packets recieved from the DSLMAX. > Anyone noticed this > > or have any ideas on how to fix it?! > > It seems like the box sends out bad packets because we have > tried almost > > anything to eliminate the half/full duplex problem.. > > > > Btw, we have two DSLMAX20 and both of them have the same problem. > > > > What kind of switch? > > Mick Dobra > Systems Administrator > MTCO Communications > 1-800-859-6826 > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/