How do you tell how many people are telnetted into the Ascend. It's been a while since I touched this old 4004 box, and I can't remember how to get into the diagnostic mode either. Ed May "Daley, Greg (Greg)" wrote: > It may be that you have themaximum number of telnet sessions > already logged into the box. > > This could be the case since the telnet connections do not use > TCP keepalives, and if you 'quit' a client telnet application, > rather than 'close', then the connection state can be left up. > > I believe that there is an idle parameter in some MAXes which > allows invalid connections to be timed out. > > This is in System>Sys Config>Idle Logout > > If the parameter is set to 0 then idle logouts are > disabled. > > setting it to any value up to 60 will give the number > of minutes which an inactive Telnet connection will > stay around for. > > Do this before you reset the box. (or after you reset it > the first time, during the same outage). Otherwise, it may > occur again in the future. > > I believe that a reset must occur for this change to take > effect. > > Greg > > > -----Original Message----- > > From: Vilmos Branyik [mailto:vbranyik at piopc.com] > > Sent: Sunday, August 12, 2001 1:40 PM > > To: 'ascend-users at max.bungi.com' > > Subject: (ASCEND) Problem telneting into 4048 > > > > > > Sorry for what I think is a very basic question. > > > > I have a 4048 that has been in service for some time. All of > > the sudden I > > can't telnet into the box. Even when I connect to it and > > change the password > > I can't get in. > > > > I haven't tried a reset yet (I'm trying to avoid one) as this > > is my primary > > dial-up access router. > > > > I've gone through the docs. Does anyone have any suggestions > > on how to fix > > this. > > > > Thanks for any suggestions. > > > > V. Branyik > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to > > ascend-users-request at bungi.com > > Archives: http://www.nexial.com/mailinglists/ > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/