I suspect you will need to change IT to 2 I have used several different pools just using numeric references, also tnt's actually use pool 1 by default, and then over write this based on the profile. -----Original Message----- From: HKruell at swd-ag.de [mailto:HKruell at swd-ag.de] Sent: Friday, 1 February 2002 6:35 PM To: ascend-users at max.bungi.com Subject: (ASCEND) Max TNT IP-Pools Hello, i tried to add new ip-pools in addition to the 1 that is working. But no way. Settings i made was : in IP-Globals: pool-base-address = [ 192.168.1.1 192.168.2.1 0.0.0.0 0.0.0.0+ assign-count = [ 50 50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + pool-name = [ 1 IT "" "" "" "" "" "" "" "" "" "" "" "" "" "" + is this all i must do ? Everyone who dials in and is configured in NAVIS_RADIUS with : Ascend-Assign-IP-Pool = 1, or Ascend-Assign-IP-Pool = IT, gets an address from pool 1. Heribert Kruell Remote Access Management Stadtwerke duesseldorf AG Germany ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/