The name of the pools are completely arbitrary. Here's my current pools: pool-chaining = yes pool-base-address = [ 63.171.251.32 204.118.174.72 63.171.251.144 0.0.0.0 0.0.0+ assign-count = [ 64 152 48 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + pool-name = [ "Pool 1" "Pool 2" "Pool 3" "" "" "" "" "" "" "" "" "" "" "" "" ""+ I would reccomend dropping the radius attribute "Ascend-Assign-IP-Pool" from your reply message. It's not needed at all unless you're doing some advanced networking. For a traditional dialup ISP, you don't need it. Good luck, -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com ** -----Original Message----- ** From: owner-ascend-users at max.bungi.com ** [mailto:owner-ascend-users at max.bungi.com]On Behalf Of Adam Spann ** Sent: Friday, February 01, 2002 3:36 AM ** To: 'HKruell at swd-ag.de'; ascend-users at max.bungi.com ** Subject: RE: (ASCEND) Max TNT IP-Pools ** ** ** I suspect you will need to change IT to 2 ** ** I have used several different pools just using numeric references, ** ** also tnt's actually use pool 1 by default, and then over write ** this based on ** the profile. ** ** ** -----Original Message----- ** From: HKruell at swd-ag.de [mailto:HKruell at swd-ag.de] ** Sent: Friday, 1 February 2002 6:35 PM ** To: ascend-users at max.bungi.com ** Subject: (ASCEND) Max TNT IP-Pools ** ** ** Hello, ** ** i tried to add new ip-pools in addition to the 1 that is working. But no ** way. ** Settings i made was : ** ** in IP-Globals: ** ** pool-base-address = [ 192.168.1.1 192.168.2.1 0.0.0.0 0.0.0.0+ ** assign-count = [ 50 50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ** 0 0 0 0 0 ** + ** pool-name = [ 1 IT "" "" "" "" "" "" "" "" "" "" "" "" "" "" + ** ** is this all i must do ? ** ** Everyone who dials in and is configured in NAVIS_RADIUS with : ** ** Ascend-Assign-IP-Pool = 1, ** ** or ** ** Ascend-Assign-IP-Pool = IT, ** ** gets an address from pool 1. ** ** ** Heribert Kruell ** Remote Access Management ** Stadtwerke duesseldorf AG ** Germany ** ** ++ Ascend Users Mailing List ++ ** To unsubscribe: send unsubscribe to ascend-users-request at bungi.com ** Archives: http://www.nexial.com/mailinglists/ ** ++ Ascend Users Mailing List ++ ** To unsubscribe: send unsubscribe to ascend-users-request at bungi.com ** Archives: http://www.nexial.com/mailinglists/ ** ** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/