Disregard that message... I got it all figured out! :) Staceman wrote: > > I recently got a Lucent/Ascend Pipeline 85 ISDN router. I've been able > to get everything working OK on it so far, with the exception of NAT > forwarding. > > Here's some details on my configuration: I have a static IP address > through my ISP. I assigned the Pipeline it's own private IP, > 192.168.100.100, and the computer it's own, 192.168.100.101, and I have > everything set up correctly as far as dialing and regular internet > access goes. I have a simple web server running on the computer. I'm > using NAT, and have it configured for local and dest ports to 80, to the > IP of the computer, 192.168.100.101. > > If I type my true IP into a browser, it gets nothing. If I type the > routers internal IP, still nothing. The only way I can get anything is > if I type in the internal IP of the computer with the web server. > > I've tried changing all sorts of settings, including entering my true > static IP into the router, to no avail (and hosed everything quite a few > times). I downloaded and installed the latest version of the on-board > software, 8.0-101.0, to see if that would make a difference, and read > over the documentation, and I still can't figure out what's going on. > > Anyone have any ideas or suggestions? > > Thanks! > Stace > _______________________________________________ > rte-ascend mailing list > rte-ascend at lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend