I use a 30 minute idle timout, 6 hour session limit. TAOS 9.0.2 new ANSWER-DEFAULTS set ppp-answer receive-auth-mode = pap-ppp-auth set ip-answer assign-address = yes set session-info idle-timer = 1800 set session-info max-call-duration = 360 -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: owner-ascend-users at max.bungi.com > [mailto:owner-ascend-users at max.bungi.com] On Behalf Of Anton Krall > Sent: Wednesday, February 20, 2002 11:12 AM > To: netlink at netlinkcorp.com; 'Foster, Dale' > Cc: ascend-users at max.bungi.com > Subject: RE: (ASCEND) disconnecting users > > > I have a tnt ... Is idle-limit the same as idle-timeout? > > If you tell the tnt in the default-answer / session-info to > use an idle > timeout of 600 and you send the parameter via radius of > idle-timeout of > 900... Which one is actually executed, the one with less > value (the one > hard coded into the tnt) or the radius sent one? > > Saludos > > Anton Krall > Director de Tecnología > Inter.net México / Panamá > > Tel; 5241-7609 Directo > Tel: 5241-7600 Conmutador > Celular: 0445-105-5160 Mobile > ICQ: 4979450 > email: akrall at team.inter.net > web: http://www.mx.inter.net > > Outside Mexico: > Office: +52(555)241-7609 > PBX: +52(555)241-7600 > Mobile: +52(555)105-5160 > > > Original > -----Original Message----- > Original > From: owner-ascend-users at max.bungi.com > Original > [mailto:owner-ascend-users at max.bungi.com] On Behalf > Original > Of NET-LINK > Original > Sent: Lunes, 18 de Febrero de 2002 10:40 p.m. > Original > To: Foster, Dale > Original > Cc: ascend-users at max.bungi.com > Original > Subject: Re: (ASCEND) disconnecting users > Original > > Original > > Original > If you are using a radius server to authenticate the > Original > dialup user, try using the following attribute in > Original > the users profile > Original > > Original > Idle-Limit = 900, > Original > > Original > > Original > 900 is equal to 900 seconds or 15 minutes for the > Original > idle to timeout. > Original > > Original > Hope this helps > Original > ------- > Original > R. Hall > Original > NET-LINK Corp. > Original > > Original > > Original > > Original > > Original > Foster, Dale wrote: > Original > > > Original > > Anyone know how to disconnect a dial-up user after > Original > they have been idle > Original > > for more than 15min. I have a MAX4000 and the > Original > users dial in on a T1 > Original > > the max has the 56k modems. - no isdn. > Original > > > Original > > Dale A. Foster > Original > > Technology Maint. & Support > Original > > Houston Chronicle > Original > > 801 Texas Avenue > Original > > Houston, Texas 77002 > Original > > Phone (713) 220-7924 > Original > > Fax (713) 354-3127 > Original > > mailto:Dale.Foster at chron.com > Original > > > Original > > ++ Ascend Users Mailing List ++ > Original > > To unsubscribe: send unsubscribe to > Original > ascend-users-request at bungi.com > Original > > Archives: http://www.nexial.com/mailinglists/ > Original > ++ Ascend Users Mailing List ++ > Original > To unsubscribe: send unsubscribe to > Original > ascend-users-request at bungi.com > Original > Archives: http://www.nexial.com/mailinglists/ > Original > > Original > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/