From: "Dennis Duval" <skipmax at seacove.net> > > We are trying to move a CT1 from a PM-3 to a Max 6096. The CT1 is > currently > > setup as Trunk-side, B8ZS, ESF, Wink-Start.. > > > > When we dial in to the max, we receive a busy signal. > > > > Who is your local telco and what switch are they using? I know for SWB > using an Ericcson or Lucent switch we have to set our Rob-Ctl to 'Inc-W-200' > instead of 'Wink Start'. I think you need to map each channel for every T1 > to slot 3 for CHT1. At least that is the way I've always set it up that > way. There are lots of reasons that you could be having problems. Email me > privately off list if you want to set up a time to compare settings over the > telephone. > Thanks to Dennis, the solution was to change Rob-Ctl to Inc-W-200, and then the Max6096 started accepting calls. Scot ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/