[Ascend] telnet block on Max TNT

[PDS]

telnet block on Max TNTLooks like a software issue. I know for sure it's supported in version 8.x onwards.

Should be freely available from ftp.ascend.com/pub
  ----- Original Message ----- 
  From: Noriega, Alejandro 
  To: PDS ; rte-ascend at lists.real-time.com 
  Sent: Wednesday, July 17, 2002 3:45 PM
  Subject: RE: [Ascend] telnet block on Max TNT


  Paul thanks you for answer me..
  but take a look:

  Oops :(

  TnTLimaTaSa-CI6#version
  Software version 7.2.4

  TnTLimaTaSa-CI6#new TACL
  error: unknown profile type
  TnTLimaTaSa-CI6#

  This is a software version problem surely, isn't it?

  zim

   -----Original Message-----
  From: PDS [mailto:aodidemo at eircom.net]
  Sent: Wednesday, July 17, 2002 10:49 AM
  To: Noriega, Alejandro; rte-ascend at lists.real-time.com
  Subject: Re: [Ascend] telnet block on Max TNT


    Use the "Telnet Access Control List", TACL

    i.e. to allow telnet from 192.168.1.0/24 :
    new TACL

    set enable-permit = yes

    set permit-list 1 valid-entry = yes

    set permit-list 1 source-address = 192.168.1.0/24

    set permit-list 1 source-address-mask = 255.255.255.0

    set permit-list 2 valid-entry = yes

    etc...

    write -f



    Hope this helps..

    Paul

      ----- Original Message ----- 
      From: Noriega, Alejandro 
      To: rte-ascend at lists.real-time.com 
      Sent: Wednesday, July 17, 2002 2:23 PM
      Subject: [Ascend] telnet block on Max TNT


      Is there any facility to Restrict telnet access on Max TNT only from few hosts or a subnet?? 
      Like router have ACLs.... 

      Thanks 

      zim 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020717/290f5e1f/attachment.htm