Hi all, I am trying to figure out how to set up filters on a TNT. I am needing to pass the name of the filter via radius as I do with my cisco and portmasters. Below are the cisco and portmaster filter. I hope someone can point me in the right direction so this is portable across the network so if a user hits a cisco, a pm3 or a tnt they get the same results. Putting the actual filter in the radius file is not an option. All help greatly appreciated. Jeffrey Radius entry: Framed-Filter = "test.in" Livingston: add filter test.in.in set filter test.in.in 1 permit 0.0.0.0/0 192.168.90.0/24 set filter test.in.in 2 deny 0.0.0.0/0 0.0.0.0/0 tcp dst eq 25 set filter test.in.in 3 deny 0.0.0.0/0 0.0.0.0/0 tcp dst eq 80 set filter test.in.in 4 deny 0.0.0.0/0 0.0.0.0/0 tcp dst eq 119 set filter test.in.in 5 permit 0.0.0.0/0 0.0.0.0/0 Cisco: ip access-list extended test permit ip any 192.168.90.0 0.0.0.255 deny tcp any any eq 80 deny udp any any eq 119 deny udp any any eq 25 permit ip any any --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.377 / Virus Database: 211 - Release Date: 7/15/2002 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/