Hi,
We are using MAX TNT and using Radiator RADIUS server.
Everything is fine except static ip assignment from
RADIUS. User is authenticated and MAX sends its
accounting start record as well. But soon after
Acct-Start, Acct-stop is sent and the
Ascend-Disconnect-Cause is "unknown"(2). Please help!!
Following is brief log of authentication and
accounting found at radius server.
Code: Access-Request
Attributes:
User-Name = "xxxxx"
User-Password = "<221>Wm<17><232><13><170>y"
NAS-IP-Address = xx.xx.xx.xx
NAS-Port = 2067
NAS-Port-Type = Async
Service-Type = Framed-User
Framed-Protocol = PPP
State = ""
Calling-Station-Id = "0512105529"
Acct-Session-Id = "396549219"
Ascend-Endpoint-Disc =
"<1><137><168><185><203><188>#K<11><168>
<25><225><168><24><4><147>"
Ascend-Data-Rate = 31200
Ascend-Xmit-Rate = 50667
*** Sending to xxx.xxx.xxx.x port 7022 ....
Code: Access-Accept
Attributes:
Framed-IP-Address = xxx.xxx.xxx.xx
Session-Timeout = 2511534
*****************************************************
Code: Accounting-Request
Attributes:
User-Name = "xxxxxxx"
NAS-IP-Address = xx.xx.xx.xx
NAS-Port = 2067
NAS-Port-Type = Async
Acct-Status-Type = Start
Acct-Delay-Time = 0
Acct-Session-Id = "396549219"
Acct-Authentic = RADIUS
Ascend-Multilink-ID = 2181694828
Ascend-Num-In-Multilink = 1
Acct-Link-Count = "<0><0><0><1>"
Acct-Multi-Session-Id = "820a056c"
Ascend-Modem-PortNo = 9
Ascend-Modem-SlotNo = 4
Ascend-Modem-ShelfNo = 1
Calling-Station-Id = "0512105529"
Framed-Protocol = 262
Framed-IP-Address = xxxxxxxxx
*** Sending to xxx.xxx.xxx.x port 7020 ....
Code: Accounting-Response
Identifier: 38
Authentic:
<191><4><27>N<28><255><11><133><201><29><231><212><232>2<21><194>
Attributes:
*** Received from xx.xx.xx.xx port 7020 ....
Code: Accounting-Request
Attributes:
User-Name = "xxxxx"
NAS-IP-Address = xx.xx.xx.xx
NAS-Port = 2067
NAS-Port-Type = Async
Acct-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Session-Id = "396549219"
Acct-Authentic = RADIUS
Acct-Session-Time = 1
Acct-Input-Octets = 369
Acct-Output-Octets = 281
Acct-Input-Packets = 13
Acct-Output-Packets = 11
Ascend-Disconnect-Cause = unknown
Ascend-Connect-Progress = prLanSessionUp
Ascend-Data-Rate = 31200
Ascend-PreSession-Time = 23
Ascend-Pre-Input-Octets = 369
Ascend-Pre-Output-Octets = 275
Ascend-Pre-Input-Packets = 13
Ascend-Pre-Output-Packets = 10
Ascend-Xmit-Rate = 50667
Ascend-Multilink-ID = 2181694828
Ascend-Num-In-Multilink = 0
Acct-Link-Count = "<0><0><0><1>"
Acct-Multi-Session-Id = "820a056c"
Ascend-Modem-PortNo = 9
Ascend-Modem-SlotNo = 4
Ascend-Modem-ShelfNo = 1
Calling-Station-Id = "0512105529"
Framed-Protocol = 262
Framed-IP-Address = xx.xx.xx.xx
*** Sending to xx.xx.xx.xx port 7020 ....
Code: Accounting-Response
*****************************************************
That's all. Session-Time shows that user was connected
for one second only. thanks for kind help!!
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request at bungi.com
Archives: http://www.nexial.com/mailinglists/