It would help if you could include more information, such as some syslog entries or radius accounting records (hint: set stop-only to yes). The key information I would need to help you out, are the Connect-Progress and Disconnect-Cause codes. -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year > -----Original Message----- > From: owner-ascend-users at max.bungi.com > [mailto:owner-ascend-users at max.bungi.com] On Behalf Of Robert Mena > Sent: Friday, August 01, 2003 3:37 PM > To: ascend-users at bungi.com > Subject: (ASCEND) Strange MAX TNT disconnection > > > Hi, > > I've been receiving some complaints from users who get > disconnected before even get authenticated. > > The same user can connect no another analog-based RAS > and other digital ones such as PM3. > > I've managed to reproduce the error using > linux+minicom. > > One thing that is "different" from other RAS is that > with the other I get the banner and login: prompt but > not with MAX. > > I am using TAOS 8.0.2 > > This session was made with linux+minicom+usr courier > modem > > Welcome to minicom 2.00.0 > > AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0 > OK > atdt222-2222 > CONNECT 31200/ARQ > NO CARRIER > > atdt222-2222 > CONNECT 31200/ARQ > NO CARRIER > > a*tdt333-3333 > CONNECT 31200/ARQ > > > User Access Verification > > Login: fmota > Password: > Entering PPP mode. > Async interface address is unnumbered (Ethernet0) > Your IP address is A.B.C.D. MTU is 1500 bytes > Header compression will match your system. > > ~~}#þ!}!} }8}"}&} }*} } > }#}$þ#}%}&},.>.}'}"}(}"8})~~}#þ!}!ù} }8}"}&} }*} } }# > ~ > > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/