What about the pinout of the cables ? I had to compare the manual to the actual connections on the outlet to get my E1 (4 wire) work. Even the TeleKomedian that installed it had no answer. HiH Burkhard Weeber viastore systems GmbH P/O Box 300668 D-70446 Stuttgart Tel: +49-711-9818-0 Email: B.Weeber at viastore.de Disclaimer: The opinions expressed herein are my personal points of view and do not represent those of my employer. Windows95: <win-doz-nin-te-fiv> n. 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company, that can't stand 1 bit of competition. > -----Original Message----- > From: owner-ascend-users at max.bungi.com > [mailto:owner-ascend-users at max.bungi.com] On Behalf Of > Michael S. Kazmier > Sent: Tuesday, June 03, 2003 12:45 PM > To: ascend-users at max.bungi.com > Subject: (ASCEND) Newbie configuration T1 on Max 6000 > > > Hello all, > > I am in desperate need of help. We recently purchased our > first of many MAX > 6000 boxes to replace older Cyclades PR4000. These are 6096 > units with the > 16 port K56 modems. Anyway, we are running channelized > (switched) T1’s, but > I cannot get a MAX 6000 to answer a line to save my life. I > have worked on > this for upwards of 40 hours now and searched through every > mailing list / > FAQ / web site I could find. I followed the various quick > start guides but > to no avail. I have no alarms on and have double / triple > checked (to the > tenth power) the T1 configuration (we are on a ESF/B8ZS – > Wink-Start line) > and all seems good. > > PLEASE HELP!!! > > Thanks, Mike > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/