The battery might not do it. Look through the manual or look for a jumper that says CMOS or CMOS RESET. Newegg won't let me zoom in on the picture so I can't look for itmyself. On Fri, 17 Jul 2015, Brian Wood wrote: > Clug writes: > > > CPU sockets are usually ZIF, or Zero Insertion Force, sockets. That means > > the CPU will just drop in without you having to apply ANY preassure. The > > CPU will ABSOLUTELY NOT go in the wrong way. You would break/bend pins if > > you tried. > > > > I had watched a video about that and that's what I tried to > do. I placed the cpu in the socket and didn't think it looked > quite right so I picked it back up and set it back down again. > Then I put the arm down. > > > > > > So... try clearing the CMOS, like it says. There's usually a jumper on the > > motherboard for that. > > I removed the battery and then put it back and tried booting, > I did that two times, but got the "00" code still. > > These are the components. > http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=i3+4370&N=-1&isNodeId=1 > > http://www.newegg.com/Product/Product.aspx?Item=N82E16813157561&cm_re=asrock_c226m-_-13-157-561-_-Product > > -- > Brian > Ebenezer Enterprises > http://webEbenezer.net > > > > >