The CMOS reset is actually two heads just south of the button battery in this photo: http://www.asrockrack.com/WS/C226M%20WS-1(L).jpg <http://www.asrockrack.com/WS/C226M%20WS-1(L).jpg> > On Jul 17, 2015, at 8:44 PM, Clug <tclug at freakzilla.com> wrote: > > The battery might not do it. Look through the manual or look for a jumper that says CMOS or CMOS RESET. Newegg won't let me zoom in on the picture so I can't look for itmyself. > > On Fri, 17 Jul 2015, Brian Wood wrote: > >> Clug writes: >> > CPU sockets are usually ZIF, or Zero Insertion Force, sockets. That means >> > the CPU will just drop in without you having to apply ANY preassure. The >> > CPU will ABSOLUTELY NOT go in the wrong way. You would break/bend pins if >> > you tried. >> > >> I had watched a video about that and that's what I tried to >> do. I placed the cpu in the socket and didn't think it looked >> quite right so I picked it back up and set it back down again. >> Then I put the arm down. >> > >> > So... try clearing the CMOS, like it says. There's usually a jumper on the >> > motherboard for that. >> I removed the battery and then put it back and tried booting, >> I did that two times, but got the "00" code still. >> These are the components. >> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=i3+4370&N=-1&isNodeId=1 >> http://www.newegg.com/Product/Product.aspx?Item=N82E16813157561&cm_re=asrock_c226m-_-13-157-561-_-Product >> -- >> Brian >> Ebenezer Enterprises >> http://webEbenezer.net > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > tclug-list at mn-linux.org > http://mailman.mn-linux.org/mailman/listinfo/tclug-list -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.mn-linux.org/pipermail/tclug-list/attachments/20150717/a4f9ac7d/attachment.html>