> Can you send the E1 PRI on your box config. ? > > Best Regards, > Ahmed El-Hakim > > --__--__-- I've taken out all of the default/empty stuff, connections,destinations,dial plans,routes (besides default), firewalls,filters,security. Steve Linebarger, Texas Metronet, 12200 Ford rd, Suite 170, Dallas Tx, 75234 http://www.metronet.com/~s (send me a cell phone/SMS text message) srl at metronet.com fax: 972-484-2173 Office: 972-488-2170 beep: 214/332-0448 Home1: 972-857-2368 Home2: 972-488-8566 Cell: 972-478-2269 -------------------------- Ready to download - type any key to start... START=SYSTEM=0=0 Name=tay2 Location=taylor comm,dallas Contact=srl at metronet.com,tmi.net/~s Max Dialout Time=255 Single Answer=No Sub-Adr=Routing Serial=3 LAN=2 V.110=4 Excl Routing=Yes Idle Logout=60 DS0 Min Rst=Monthly No Trunk Alarm=Yes New NASPortID=Yes EchoSuppressToneDisable=Yes Perm Conn Update=Changed Modem:PRI # Type=National END=SYSTEM=0=0 START=ROUTE=900=0 Name=Default Active=Yes Gateway=207.170.105.1 Metric=1 Private=Yes END=ROUTE=900=0 Use Answer as Default=Yes Select CLID=User Prefer Assign Adrs=Yes Encaps...COMB=No Encaps...FR=No PPP options...Link Comp=None COMB options...Compression=None Session options...Idle=65533 Session options...TS Idle Mode=Input/Output Session options...TS Idle=300 END=CONN=900=0 START=CONN=900=1 END=CONN=900=1 START=SWAN=1100=0 Ext. Clock * 1K=64 END=SWAN=1100=0 START=LMODEM=300=0 Ans 1#=1 Ans 2#=2 Ans 3#=3 Ans 4#=0 END=LMODEM=300=0 START=LMODEM=400=0 Ans 1#=1 Ans 2#=2 Ans 3#=3 Ans 4#=0 END=LMODEM=400=0 START=LMODEM=500=0 Ans 1#=1 Ans 2#=2 Ans 3#=3 Ans 4#=0 END=LMODEM=500=0 START=ETHERNET=900=0 Ether options...IP Adrs=207.170.105.2/26 Ether options...2nd Adrs=207.170.110.3/27 Ether options...RIP=Both-v2 Ether options...Ignore Def Rt=No Ether options...Proxy Mode=Active WAN options...Dial Plan=Extended WAN options...Pool#1 start=207.170.105.17 WAN options...Pool#1 count=47 WAN options...Pool#1 name:=max1-pool1 TServ options...TS Enabled=Yes TServ options...PPP=Yes TServ options...Telnet=Yes TServ options...Immed Service=Rlogin TServ options...Immed Host=192.245.137.3 TServ options...PPP Delay=1 TServ options...PPP Direct=Yes ICMP Redirects=Ignore DNS...Domain Name=tmi.net DNS...Sec Domain Name=metronet.com DNS...Pri DNS=204.29.189.130 DNS...Sec DNS=204.29.189.130 DNS...Client Pri DNS=204.29.189.130 DNS...Client Sec DNS=192.245.137.1 Auth...Auth=RADIUS Auth...Auth Host #1=207.170.106.14 Auth...Auth Host #2=192.245.137.12 Auth...Auth Host #3=192.245.137.3 Auth...Auth Port=1645 Auth...Auth Timeout=3 Auth...Auth Key=*SECURE* Auth...Local Profiles First=No Accounting...Acct=RADIUS Accounting...Acct Host #1=192.245.137.3 Log...Syslog=Yes Log...Log Host=192.245.137.1 Log...Log Software Version=Yes Log...Log CallInfo=EndOfCall Modem Ringback=No Finger=Yes Call Logging...Call Log=Yes Call Logging...Host #1=192.245.137.3 Call Logging...Call Log Timeout=60 Call Logging...Key=*SECURE* Reply DirectedBcast Ping=No Forward Directed Bcast=No END=ETHERNET=900=0 START=LINE=100=0 Name=Factory 2nd Line=Trunk Line 1...Sig Mode=ISDN Line 1...Switch Type=NI-2 Line 1...Framing Mode=ESF Line 1...Encoding=B8ZS Line 1...Ch 24=D-Channel Line 2...Sig Mode=ISDN Line 2...Switch Type=NI-2 Line 2...Framing Mode=ESF Line 2...Encoding=B8ZS Line 2...Ch 1=Unused Line 2...Ch 2=Unused Line 2...Ch 3=Unused Line 2...Ch 4=Unused Line 2...Ch 5=Unused Line 2...Ch 6=Unused Line 2...Ch 7=Unused Line 2...Ch 8=Unused Line 2...Ch 9=Unused Line 2...Ch 10=Unused Line 2...Ch 11=Unused Line 2...Ch 12=Unused Line 2...Ch 13=Unused Line 2...Ch 14=Unused Line 2...Ch 15=Unused Line 2...Ch 16=Unused Line 2...Ch 17=Unused Line 2...Ch 18=Unused Line 2...Ch 19=Unused Line 2...Ch 20=Unused Line 2...Ch 21=Unused Line 2...Ch 22=Unused Line 2...Ch 23=Unused Line 2...Ch 24=D-Channel END=LINE=100=0 START=LINE=100=1 END=LINE=100=1 START=LINE=100=2 END=LINE=100=2 START=LINE=100=3 END=LINE=100=3 START=LINE=100=4 END=LINE=100=4 START=LINE=200=0 Name=Factory END=LINE=200=0 START=LINE=200=1 END=LINE=200=1 START=LINE=200=2 END=LINE=200=2 START=LINE=200=3 END=LINE=200=3 START=LINE=200=4 END=LINE=200=4 END DOWNLOAD Download complete - type any key to return to menu...