At 10:51 AM 4/12/01 -0500, Dennis Duval wrote: >Wed Apr 11 11:01:37 2001: Error: Accounting: no username in record > >Is NOT just occurring on the new Max 6096. I am seeing them occur on at >least one of the 4000 units that was not even powered up at the time of the >major problems. Also associated with this error message is an radius >accounting stop record but no start record. In one case it showed >Ascend-Disconnect-Cause = 10 (the modem never detected DCD). In several >other instances, Ascend-Disconnect-Cause = 120 (one end refused the call >because the protocol was disabled or unsupported). During the major problem >period, I see that most if not all were Ascend-Disconnect-Cause = 185 >(remote end hung up). So I am probably totally off base in assuming that >the radius messages being seen now are a result of the same problem as was >effecting Line 3 and Line 4 on the 6096. I'm going to go out on a limb and suggest that the radius error has nothing to do with the high pitched tone problem. I've had this tone problem for 3 years and have never once seen that error in my radius.log. I really have no idea what *is* causing it though, sorry :) Susie ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>