Max 4000 HP . With all cables and power removed remove all cards from the box, open the case and orient the LEDs toward you (the front). . Locate P3 and short it. . Attach the serial and power cables. Power up at 57600 N-8-1 no flow-control . At the > prompt enter DF then upload the correct version of firmware. Down load the software using Xmodem 57600-N-8-1 no flowcontrol. . Power down the unit, remove the jumper from P3 and put the cover back on . Reconfigure the terminal/serial connection for 9600 and configure the Max, or use the configurator. Max4000 . With all cables and power removed remove all cards from the box, open the case and orient the LEDs toward you (the front). . Locate P6 and short it. . Attach the serial and power cables. Power up at 57600 N-8-1 no flow-control . At the > prompt enter DF then upload the correct version of firmware. Down load the software using Xmodem 57600-N-8-1 no flowcontrol. . Power down the unit, remove the jumper from P6 and put the cover back on . Reconfigure the terminal/serial connection for 9600 and configure the Max, or use the configurator. David Pascarella CCNP MCSE LCTE A+ Network Support Engineer SOLUServe TAC 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905-3562 888.449.5766 800.795.2814 fax: 321.308.7986 mailto:dpascarella at solunet.com www.solunet.com -----Original Message----- From: Karl Gaissmaier [mailto:karl.gaissmaier at rz.uni-ulm.de] Sent: Thursday, August 29, 2002 12:19 PM To: Troy Settle Cc: ascend-users at bungi.com Subject: [Ascend] Re: (ASCEND) MAX 4000 and POST FAILURE (05), some help needed Hi Troy, Troy Settle schrieb: > > http://www.tek-tips.com/gviewthread.cfm/lev2/8/lev3/58/pid/574/qid/289636 this describes MAX-6000 and I think the jumpers may be different for MAX-4000. Do you have any more help? Regards and thanks so long already, Charly -- Karl Gaissmaier Computing Center,University of Ulm,Germany Email:karl.gaissmaier at rz.uni-ulm.de Network Administration Tel.: ++49 731 50-22499 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/ _______________________________________________ rte-ascend mailing list rte-ascend at lists.real-time.com https://mailman.real-time.com/mailman/listinfo/rte-ascend ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/